DirectAir heat recovery ventilator 200CFM PHRV200
240 CFM (non-ducted)
The PHRV200 unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The PHRV200 is equipped with automatic defrost mechanisms so you can use your HRV all year long.
•6" (152 mm) duct connections with integrated airflow measurement
•Removable screw terminal for easy connection
•Lightweight: only 59.5 lbs (27 kg) including core
•Aluminum heat recovery core
•Multiple speed operation
MOTORS: Two (2) German-manufactured, factory-balanced EBM motors with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation. Covered by a seven (7) year warranty.
HEAT RECOVERY CORE: Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 12” x 12” (305 x 305 mm) with a 15” (380 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.
FROST PREVENTION SYSTEM: A preset defrost sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.
SERVICEABILITY: Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 22" (559 mm) of clearance is recommended for removal of core.
DUCT CONNECTIONS: 6" (152 mm) plastic duct connections with integrated balancing damper and airflow measurement ports.
CASE: 24 gauge galvanized steel. Baked power-coated paint for a superior adhesion and resistance.
INSULATION: Cabinet is fully insulated with 1" (25 mm) high density expanded polystyrene.
FILTERS: Two (2) washable electrostatic panel type air filters 11.75” (298mm) x 15” (380mm) x 0.125” (3mm).
DRAIN: 1/2" (13mm) OD (outside diameter) drain spout provided, entire bottom of unit covered by drain pan.
WARRANTY: Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.
|Make & Model|
|Certifications & Standards|
There are currently no resources for this product.